• ELIMINATES WAXING

• LONG LASTING SHINE

• EASIER TO CLEAN

• NO SPECIAL MAINTENANCE

• NO RE-PROCESSING EVERY 6 MONTHS

• PROTECTS PAINT AGAINST ELEMENTS

• RESTORES GLOSS TO OLDER VEHICLES

• INCREASE RESALE VALUE

• WRITTEN THREE YEAR WARRANTY ON NEW VEHICLES

All vehicles, whether factory painted, or painted at the local paint and body shop, are spray painted. This method of application causes the paint to hit the metal surfaces and dry in hills and valleys - creating a microscopic porous surface. The Mirror Finish is a natural paint finishing process, not a chemical coating or wax, that causes the paint to smooth out, reflow and seal itself. The result is a glass-like, reflecting shine that will never need waxing on a new vehicle.

The Mirror finish begins with a thorough hand wash (or pre-wash) of the vehicle to remove bird droppings, dirt, tar and road contaminants so that the surface of the vehicle is as clean as possible before certified technicians begin the Mirror process. Step one in the process cleans out the paint's microscopic pores of embedded dirt, grime and residue wax. This cleaning procedure is achieved with the use of select chemicals, wool bonnets and special buffing techniques to the exterior painted surfaces

The second step in the Mirror process, again using specialized buffing bonnets and techniques, heats the paint causing the surface layer to reflow and seal itself, producing the unique finish that leaves no residue or coating to wear off. A second hand wash (or post-wash) is done to the vehicle to remove chemical spin-off from the tires, wheel wells, crevices, windshields, vinyl top and door jams. Next, exterior detailing which includes shampooing of the floor mats, vacuuming the carpets, cleaning the glass inside and out, emptying the ashtrays, polishing the chrome and using a silicone protective dressing on the tires and bumpers to maintain their shiny appearance is completed.,

Step three, final inspection of the vehicle, ensures that all phases of the Mirror process have been correctly completed by the certified technicians and that the vehicle is ready for delivery to its owner, with a shine that will last - GUARANTEED

MICROSCOPIC CROSS SECTION OF PAINT SURFACE

ORIGINAL PAINT CONDITION	As a car ages the hills and valleys of the paint's surface fills up with dirt, grime, wax residue, etc. This contributes to the loss of shine and oxidation on a car's paint.
CLEANING THE PORES	The mirror process and the chemicals clean out the dirt, etc. that is embedded in the surface so that the first layer of paint - usually the clear coat on new cars - is reached and then cleaned.
CLOSING THE PORES	The mirror process closes and eliminates the hills and valleys and creates a smooth glass-like surface that reflects the light for a deep long lasting shine.

The Mirror Finish, a unique process, utilizes a wool bonnet to heat a small area of the paint and to close the paint pores, while select chemicals keep the paint lubricated during the process. There are no chemicals, waxes or coatings left on the paint.

The best time for a Mirror Finish is when the vehicle is brand new, but the Mirror Finish also restores the lost shine on older cars.

	Before
	After

Photo Album